首页 |元器件品牌

LQLB2016T220M [TAIYO YUDEN]

General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 0806, CHIP, 0806, ROHS COMPLIANT;
LQLB2016T220M
型号： LQLB2016T220M
厂家： TAIYO YUDEN (U.S.A.), INC    TAIYO YUDEN (U.S.A.), INC
描述：

General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 0806, CHIP, 0806, ROHS COMPLIANT

测试 射频感应器 电感器
文件： 总13页 (文件大小：407K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Notice for TAIYO YUDEN productsꢀ  
Please read this notice before using the TAIYO YUDEN products.  
REMINDERS  
■ Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change  
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-  
fore practical application or usage of the Products.  
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-  
rating such products, which are caused under the conditions other than those specified in this catalog or individual  
specification.  
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is  
available.  
■ Please conduct validation and verification of products in actual condition of mounting and operating environment  
before commercial shipment of the equipment.  
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for  
use in general electronics equipment.(for AV, office automation, household, office supply, information service,  
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any  
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,  
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have  
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.  
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-  
rine system, military, etc. where higher safety and reliability are especially required.  
In addition, even electronic components or functional modules that are used for the general electronic equipment,  
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-  
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to  
install a protective circuit is strongly recommended at customer's design stage.  
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-  
tors (so called“TAIYO YUDEN’s official sales channel”).  
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.  
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-  
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of  
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.  
■ Caution for export  
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-  
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.  
Should you have any question or inquiry on this matter, please contact our sales staff.  
WIRE-WOUND CHIP INDUCTORS (LB SERIES)  
REFLOW  
■PARTS NUMBER  
△＝Blank space  
L
B
△ △  
②
2
0
1
2
T
1
0
0
M
△
⑦
△ △ △  
⑧
①
③
④
⑤
⑥
①Series name  
④Packaging  
Code  
LB  
Series name  
Code  
T
Packaging  
Wound chip inductor  
Taping  
②Characteristics  
⑤Nominal inductance  
Code  
△△  
△C  
△R  
MF  
Characteristic  
Standard  
Code  
Nominal inductance［μH］  
（example）  
1R0  
1.0  
10  
High current  
Low Rdc  
100  
101  
100  
Low loss  
※R＝Decimal point  
③Dimensions（L×W）  
Code  
／
⑥Inductance tolerance  
Dimensions  
Type（inch）  
Code  
K
Inductance tolerance  
±10％  
（L×W）［mm］  
1.6×0.8  
1608  
2012  
2016  
2518  
3218  
3225  
1608（0603）  
2012（0805）  
2016（0806）  
2518（1007）  
3218（1207）  
3225（1210）  
M
±20％  
2.0×1.25  
2.0×1.6  
⑦Special code  
2.5×1.8  
Code  
△
Special code  
Standard  
3.2×1.8  
3.2×2.5  
R
Low Rdc type  
⑧Internal code  
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY  
Standard quantity [pcs]  
Type  
LB 1608  
LMF1608  
L
W
T
e
Paper tape  
Embossed tape  
1.6±0.1  
（0.063±0.004）  
1.6±0.2  
0.8±0.1  
（0.031±0.004）  
0.8±0.2  
0.8±0.1  
（0.031±0.004）  
0.8±0.2  
0.35±0.15  
（0.014±0.006）  
0.45±0.15  
4000  
－
－
－
－
－
3000  
（0.063±0.008）  
（0.031±0.008）  
（0.031±0.008）  
（0.016±0.006）  
LB 2012  
LB C2012  
LB R2012  
LB 2016  
LB C2016  
LB 2518  
LB C2518  
LB R2518  
2.0±0.2  
1.25±0.2  
1.25±0.2  
0.5±0.2  
3000  
2000  
2000  
2000  
（0.079±0.008）  
（0.049±0.008）  
（0.049±0.008）  
（0.020±0.008）  
2.0±0.2  
1.6±0.2  
1.6±0.2  
0.5±0.2  
（0.079±0.008）  
（0.063±0.008）  
（0.063±0.008）  
（0.020±0.008）  
2.5±0.2  
1.8±0.2  
1.8±0.2  
0.5±0.2  
（0.098±0.008）  
（0.071±0.008）  
（0.071±0.008）  
（0.020±0.008）  
3.2±0.2  
（0.128±0.008）  
3.2±0.2  
1.8±0.2  
（0.071±0.008）  
2.5±0.2  
1.8±0.2  
（0.071±0.008）  
2.5±0.2  
0.6±0.2  
（0.024±0.008）  
0.6±0.3  
LB 3218  
LB C3225  
－
－
1000  
（0.128±0.008）  
（0.098±0.008）  
（0.098±0.008）  
（0.024±0.012）  
Unit：mm（inch）  
Recommended Land Patterns  
Surface Mounting  
Type  
A
B
C
0.9  
1608  
MF1608  
2012  
0.55  
0.55  
0.60  
0.60  
0.60  
0.85  
0.85  
0.7  
0.7  
1.0  
1.0  
1.5  
1.7  
1.7  
・Mounting and soldering conditions should be checked  
beforehand.  
1.0  
1.45  
1.8  
・ Applicable soldering process to these products is  
reflow soldering only.  
2016  
2518  
2.0  
3218  
2.0  
3225  
2.7  
Unit：mm  
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ  
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ  
ꢀ
58  
■PARTS NUMBER  
●1608（0603）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB 1608T1R0M  
LB 1608T2R2M  
LB 1608T4R7M  
LB 1608T8R2M  
LB 1608T100M  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
4.7  
8.2  
10  
±20％  
±20％  
±20％  
±20％  
±20％  
100  
80  
45  
32  
32  
0.17  
0.33  
0.55  
0.70  
0.70  
160  
115  
70  
7.96  
7.96  
7.96  
2.52  
2.52  
60  
60  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LBMF1608T1R0M  
LBMF1608T2R2M  
LBMF1608T3R3M  
LBMF1608T4R7M  
LBMF1608T100[]  
LBMF1608T220[]  
LBMF1608T470[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
3.3  
4.7  
10  
±20％  
±20％  
100  
80  
60  
45  
32  
16  
11  
0.09  
0.17  
0.22  
0.24  
0.36  
1.0  
230  
160  
130  
110  
80  
7.96  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
22  
50  
47  
2.5  
35  
●2012（0805）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB 2012T1R0M  
LB 2012T2R2M  
LB 2012T3R3M  
LB 2012T4R7M  
LB 2012T6R8M  
LB 2012T100[]  
LB 2012T100[]R  
LB 2012T150[]  
LB 2012T220[]  
LB 2012T470[]  
LB 2012T680[]  
LB 2012T101[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
±20％  
100  
80  
55  
45  
38  
32  
32  
28  
16  
11  
10  
8
0.15  
0.23  
0.30  
0.40  
0.47  
0.70  
0.50  
1.3  
405  
260  
235  
190  
135  
120  
120  
100  
80  
7.96  
7.96  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
0.796  
±20％  
±20％  
±20％  
／
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
10  
15  
22  
1.7  
47  
3.7  
60  
68  
6.0  
50  
100  
7.0  
45  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LB C2012T1R0M  
LB C2012T2R2M  
LB C2012T4R7M  
LB C2012T100[]  
LB C2012T220[]  
LB C2012T470[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
4.7  
10  
±20％  
±20％  
100  
70  
45  
40  
16  
11  
0.19  
0.33  
0.50  
1.2  
620  
430  
295  
200  
130  
90  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
22  
3.7  
47  
5.8  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LB R2012T1R0M  
LB R2012T2R2M  
LB R2012T4R7M  
LB R2012T100[]  
LB R2012T220[]  
LB R2012T470[]  
LB R2012T101[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
4.7  
10  
±20％  
100  
80  
45  
32  
16  
11  
8
0.07  
0.13  
0.24  
0.36  
1.0  
400  
260  
200  
150  
100  
75  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
0.796  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
22  
47  
1.7  
100  
4.0  
50  
●2016（0806）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB 2016T1R0M  
LB 2016T1R5M  
LB 2016T2R2M  
LB 2016T3R3M  
LB 2016T4R7M  
LB 2016T6R8M  
LB 2016T100[]  
LB 2016T150[]  
LB 2016T220[]  
LB 2016T330[]  
LB 2016T470[]  
LB 2016T680[]  
LB 2016T101[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
±20％  
100  
80  
70  
55  
45  
38  
32  
28  
16  
14  
11  
10  
8
0.09  
0.11  
0.13  
0.20  
0.25  
0.35  
0.50  
0.70  
1.0  
490  
380  
375  
285  
225  
200  
155  
130  
105  
85  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
0.796  
±20％  
±20％  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
15  
22  
33  
1.7  
47  
2.4  
70  
68  
3.0  
55  
100  
4.5  
40  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LB C2016T1R0M  
LB C2016T1R5M  
LB C2016T2R2M  
LB C2016T3R3M  
LB C2016T4R7M  
LB C2016T6R8M  
LB C2016T100[]  
LB C2016T150[]  
LB C2016T220[]  
LB C2016T330[]  
LB C2016T470[]  
LB C2016T680[]  
LB C2016T101[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
±20％  
100  
80  
70  
55  
45  
38  
32  
28  
16  
14  
11  
10  
8
0.10  
0.15  
0.20  
0.27  
0.37  
0.59  
0.82  
1.2  
690  
600  
520  
410  
355  
290  
245  
200  
165  
135  
110  
95  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
0.796  
±20％  
±20％  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
15  
22  
1.8  
33  
2.8  
47  
4.3  
68  
7.0  
100  
8.0  
75  
・ [] Please specify the Inductance tolerance code（K or M）  
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ  
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ  
ꢀ
59  
■PARTS NUMBER  
●2518（1007）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB 2518T1R0M  
LB 2518T1R5M  
LB 2518T2R2M  
LB 2518T3R3M  
LB 2518T4R7M  
LB 2518T4R7MR  
LB 2518T6R8M  
LB 2518T100[]  
LB 2518T150[]  
LB 2518T220[]  
LB 2518T330[]  
LB 2518T470[]  
LB 2518T680[]  
LB 2518T101[]  
LB 2518T151[]  
LB 2518T221[]  
LB 2518T331[]  
LB 2518T471[]  
LB 2518T681[]  
LB 2518T102[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.5  
2.2  
3.3  
4.7  
4.7  
6.8  
10  
±20％  
100  
80  
0.06  
0.07  
0.09  
0.11  
0.13  
0.10  
0.15  
0.25  
0.32  
0.50  
0.70  
0.95  
1.5  
665  
405  
340  
280  
240  
235  
195  
165  
145  
115  
95  
7.96  
7.96  
±20％  
±20％  
68  
7.96  
±20％  
54  
7.96  
±20％  
46  
7.96  
±20％  
46  
7.96  
±20％  
38  
7.96  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
30  
2.52  
15  
23  
2.52  
22  
19  
2.52  
33  
15  
2.52  
47  
12  
85  
2.52  
68  
9.5  
9.0  
7.0  
5.5  
4.5  
3.5  
3.0  
2.4  
70  
2.52  
100  
150  
220  
330  
470  
680  
1000  
2.1  
60  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
0.252  
3.2  
45  
4.5  
40  
7.0  
30  
10  
25  
17  
20  
24  
15  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LB C2518T1R0M  
LB C2518T1R0MR  
LB C2518T1R5M  
LB C2518T2R2M  
LB C2518T3R3M  
LB C2518T4R7M  
LB C2518T6R8M  
LB C2518T100[]  
LB C2518T150[]  
LB C2518T220[]  
LB C2518T330[]  
LB C2518T470[]  
LB C2518T680[]  
LB C2518T101[]  
LB C2518T151[]  
LB C2518T221[]  
LB C2518T331[]  
LB C2518T471[]  
LB C2518T681[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
100  
100  
80  
0.08  
0.07  
0.11  
0.13  
0.16  
0.20  
0.30  
0.36  
0.65  
0.77  
1.5  
775  
890  
730  
630  
560  
510  
420  
375  
285  
250  
185  
165  
140  
125  
95  
7.96  
7.96  
／
±20％  
±20％  
7.96  
±20％  
68  
7.96  
±20％  
54  
7.96  
±20％  
41  
7.96  
±20％  
38  
7.96  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
30  
2.52  
15  
23  
2.52  
22  
19  
2.52  
33  
15  
2.52  
47  
12  
1.9  
2.52  
68  
9.5  
9.0  
7.0  
5.5  
4.5  
3.5  
3.0  
2.8  
2.52  
100  
150  
220  
330  
470  
680  
3.7  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
6.1  
8.4  
80  
12.3  
22  
65  
50  
28  
45  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
Parts number  
EHS  
Inductance tolerance  
LB R2518T1R0M  
LB R2518T2R2M  
LB R2518T4R7M  
LB R2518T100[]  
LB R2518T220[]  
LB R2518T470[]  
LB R2518T101[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
2.2  
4.7  
10  
±20％  
100  
68  
45  
30  
19  
11  
9
0.045  
0.07  
0.10  
0.19  
0.44  
0.84  
1.89  
960  
480  
345  
235  
175  
120  
80  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
0.796  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
22  
47  
100  
●3218（1297）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB 3218T1R0M  
LB 3218T1R5M  
LB 3218T2R2M  
LB 3218T3R3M  
LB 3218T4R7M  
LB 3218T6R8M  
LB 3218T100[]  
LB 3218T150[]  
LB 3218T220[]  
LB 3218T330[]  
LB 3218T470[]  
LB 3218T680[]  
LB 3218T101[]  
LB 3218T151[]  
LB 3218T221[]  
LB 3218T331[]  
LB 3218T471[]  
LB 3218T681[]  
LB 3218T102[]  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
100  
80  
0.06  
0.07  
0.09  
0.11  
0.13  
0.17  
0.25  
0.32  
0.49  
0.75  
0.92  
1.49  
2.4  
1,075  
860  
775  
560  
550  
380  
340  
300  
255  
215  
205  
145  
140  
105  
80  
7.96  
7.96  
±20％  
±20％  
68  
7.96  
±20％  
54  
7.96  
±20％  
41  
7.96  
±20％  
40  
7.96  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
30  
2.52  
15  
25  
2.52  
22  
19  
2.52  
33  
15  
2.52  
47  
12  
2.52  
68  
11  
2.52  
100  
150  
220  
330  
470  
680  
1000  
8.0  
7.0  
5.0  
4.0  
3.5  
3.0  
2.4  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
0.252  
3.2  
5.4  
7.0  
65  
14  
54  
17  
45  
27  
39  
・ [] Please specify the Inductance tolerance code（K or M）  
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ  
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ  
ꢀ
60  
■PARTS NUMBER  
●3225（1210）type  
Parts number  
Nominal inductance  
［μH］  
Self-resonant frequency  
［MHｚ］（min.）  
DC Resistance  
［Ω］（±30％）  
Rated current  
［mA］（max.）  
Measuring frequency  
［MHz］  
EHS  
Inductance tolerance  
LB C3225T1R0MR  
LB C3225T1R5MR  
LB C3225T2R2MR  
LB C3225T3R3MR  
LB C3225T4R7MR  
LB C3225T6R8MR  
LB C3225T100[]R  
LB C3225T150[]R  
LB C3225T220[]R  
LB C3225T330[]R  
LB C3225T470[]R  
LB C3225T680[]R  
LB C3225T101[]R  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
±20％  
±20％  
250  
220  
190  
160  
70  
50  
23  
20  
17  
13  
10  
8
0.055  
0.060  
0.080  
0.095  
0.100  
0.120  
0.133  
0.195  
0.27  
1,100  
1,000  
930  
820  
680  
620  
540  
420  
330  
300  
220  
190  
150  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
±20％  
±20％  
±20％  
±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
±10％，±20％  
15  
22  
33  
0.41  
47  
0.67  
68  
1.0  
100  
6
1.4  
・ [] Please specify the Inductance tolerance code（K or M）  
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ  
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ  
ꢀ
61  
WIRE-WOUND CHIP INDUCTORS (LB SERIES)，  
WIRE-WOUND CHIP POWER INDUCTORS (CB SERIES)，  
WIRE-WOUND CHIP INDUCTORS FOR SIGNAL LINES (LB SERIES M TYPE)  
■PACKAGING  
①Minimum Quantity  
Standard Quantity ［pcs］  
Type  
Paper Tape  
Embossed Tape  
LB C3225  
CB C3225  
LB 3218  
LB R2518  
LB C2518  
LB 2518  
CB 2518  
CB C2518  
LBM2016  
LB C2016  
LB 2016  
CB 2016  
CB C2016  
LB 2012  
LB C2012  
LB R2012  
CB 2012  
CB C2012  
CB L2012  
LB 1608  
LBMF1608  
CBMF1608  
－
－
1000  
2000  
－
－
－
2000  
2000  
3000  
4000  
4000  
－
－
－
3000  
②Tape material  
●Embossed tape  
③Taping Dimensions  
●Embossed Tape （0.315 inches wide）  
●Card board carrier tape（ 0.315 inches wide）  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_pack_e-01  
Chip cavity  
Insertion pitch  
F
Tape thickness  
Type  
LBM2016  
A
B
T
K
1.75±0.1  
2.1±0.1  
4.0±0.1  
0.3±0.05  
1.9max.  
（0.069±0.004）  
2.8±0.1  
（0.083±0.004）  
3.5±0.1  
（0.157±0.004）  
4.0±0.1  
（0.012±0.002）  
0.3±0.05  
（0.075max.）  
4.0max.  
LB C3225  
CB C3225  
（0.110±0.004）  
2.1±0.1  
（0.138±0.004）  
3.5±0.1  
（0.157±0.004）  
4.0±0.1  
（0.012±0.002）  
0.3±0.05  
（0.157max.）  
2.2max.  
LB 3218  
（0.083±0.004）  
（0.138±0.004）  
（0.157±0.004）  
（0.012±0.002）  
（0.087max.）  
LB 2518  
CB 2518  
LB C2518  
CB C2518  
LB R2518  
LB 2016  
CB 2016  
LB C2016  
CB C2016  
LB 2012  
CB 2012  
LB C2012  
CB C2012  
LB R2012  
2.15±0.1  
2.7±0.1  
4.0±0.1  
0.3±0.05  
2.2max.  
（0.085±0.004）  
（0.106±0.004）  
（0.157±0.004）  
（0.012±0.002）  
（0.087max.）  
1.75±0.1  
2.1±0.1  
4.0±0.1  
0.3±0.05  
1.9max.  
（0.069±0.004）  
（0.083±0.004）  
（0.157±.004）  
（0.012±0.002）  
（0.075max.）  
1.45±0.1  
2.25±0.1  
4.0±0.1  
0.25±0.05  
1.45max.  
（0.057±0.004）  
（0.089±0.004）  
（0.157±0.004）  
（0.010±0.002）  
（0.057max.）  
1.55±0.1  
（0.061±0.004）  
1.0±0.1  
2.3±0.1  
（0.091±0.004）  
1.8±0.1  
4.0±0.1  
（0.157±0.004）  
4.0±0.1  
1.1max.  
（0.043max.）  
1.1max.  
1.1max.  
（0.043max.）  
1.1max.  
CB L2012  
LB 1608  
（0.039±0.004）  
1.1±0.1  
（0.071±0.004）  
1.9±0.1  
（0.157±0.004）  
4.0±0.1  
（0.043max.）  
0.25±0.05  
（0.010±0.002）  
（0.043max.）  
1.2max.  
LBMF1608  
CBMF1608  
（0.043±0.004）  
（0.075±0.004）  
（0.157±0.004）  
（0.047max.）  
Unit：mm（inch）  
④Leader and Blank Portion  
⑤Reel Size  
⑥Top Tape Strength  
The top tape requires a peel-off force 0.2 to 0.7N in the direction of the arrow as illustrated below.  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_pack_e-01  
WIRE-WOUND CHIP INDUCTORS (LB SERIES),  
WIRE-WOUND CHIP POWER INDUCTORS (CB SERIES),  
WIRE-WOUND CHIP INDUCTORS FOR SIGNAL LINES (LB SERIES M TYPE)  
■RELIABILITY DATA  
1.Operating temperature Range  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Specified Value  
－40～＋105℃（Including self-generated heat）  
2. Storage Temperature Range（after soldering）  
LB, LBC, LBR, LBMF Series  
Specified Value  
CB, CBC, CBL, CBMF Series  
LBM Series  
－40～＋85℃  
Test Methods and LB, CB Series：  
Remarks  
Please refer the term of "7. storage conditions" in precautions.  
3.Rated Current  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Within the specified tolerance  
4.Inductance  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Specified Value  
Within the specified tolerance  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series  
Remarks  
Measuring equipmet  
：LCR Mater（HP4285A or its equivalent）  
5.Q  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
－
Specified Value  
Within the specified tolerance  
Test Methods and LBM Series  
Remarks  
Measuring equipment  
: LCR Mater（HP4285A or its equivalent）  
6.DC Resisitance  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Within the specified tolerance  
Test Methods and  
Remarks  
Measuring equipment : DC Ohmmeter （HIOKI 3227 or its equivalent）  
7.Self-Resonant Frequency  
LB, LBC, LBR, LBMF Series  
Specified Value  
CB, CBC, CBL, CBMF Series  
LBM Series  
Within the specified tolerance  
Test Methods and  
Remarks  
Measuring equipment : Impedance analyzer （HP4291A or its equivalent）  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_reli_e-01  
8.Temperature Characteristic  
LBM2016  
Inductance change : Within±5％  
Inductance change : Within±20％  
LB1608  
LB2012  
LBR2012  
CB2016  
LBC3225  
LBC2016  
LB3218  
CB2012  
LB2518  
CBL2012  
LB2016  
Specified Value  
LBR2518  
LBMF1608  
LBC2518  
LBC2012  
CB2518  
CBC3225  
CBC2016  
CBMF1608  
CBC2518  
CBC2012  
Inductance change : Within±25％  
Inductance change : Within±35％  
Test Methods and Change of maximum inductance deviation in step 1-5  
Remarks  
Temperature（℃）  
Step  
LB, CB Series  
1
2
3
4
5
20  
－40  
20（Reference temperature）  
＋85（Maximum operating temperature）  
20  
9.Rasistance to Flexure of Substrate  
LB, LBC, LBR, LBMF Series  
Specified Value  
CB, CBC, CBL, CBMF Series  
LBM Series  
No damage.  
Test Methods and Warp  
: 2mm（LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series）  
Remarks  
Test substrate : Board according to JIS C0051  
Thickness  
: 0.8mm（LB・LBMF・CBMF1608）  
: 1.0ｍｍ（Others）  
10.Body Strength  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
No damage.  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM  
Remarks Applied force : 10N  
Duration  
: 10sec.  
LB1608・LBMF1608・CBMF1608  
Applied force : 5N  
Duration  
: 10sec.  
11.Adhesion of terminal electrode  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Specified Value  
No abnormality.  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF  
Remarks  
Applied force  
Duration  
: 10N to X and Y directions  
: 5 sec.  
Test substrate  
: Printed board  
LB1608・CBMF1608・LBMF1608  
Applied force  
Dration  
: 5N toX and Y directions  
: 5 sec.  
Test substrate  
: Printed board  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_reli_e-01  
12.Resistance to vibration  
LB, LBC, LBR, LBMF Series  
Inductance change : Within±10％  
No significant abnormality in appearance.  
CB, CBC, CBL, CBMF Series  
LBM Series  
Specified Value  
Inductance change : Within±5％  
No significant abnormality in appearance.  
Test Methods and LB・LBR・LBC・CB・CBC・CBL・LBM・LBMF・CBMF : According to JIS C5102 clause 8.2.  
Remarks  
Vibration type  
Directions  
: A  
: 2 hrs each in X, Y and Z directions. Total：6 hrs  
: 10 to 55 to 10 Hz（1min.）  
Freuency range  
Amplitude  
: 1.5mm  
Mounting method  
Recovery  
: Soldering onto printed board  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48  
hs.  
13.Drop test  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Specified Value  
－
14.Solderability  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
At least 90％ of surface of terminal electrode is covered by new  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：  
Remarks  
Solder temperature  
Duration  
: 245±5℃  
: 5±0.5sec  
Flux  
: Methanol solution with 25％ of colophony  
15.Resistance to soldering  
LB, LBC, LBR, LBMF Series  
Inductance change : Within±10％  
Inductance change : Within±5％  
Specified Value  
CB, CBC, CBL, CBMF Series  
LBM Series  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：  
Remarks 3 times of reflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.  
16.Resisitance to solvent  
LB, LBC, LBR, LBMF Series  
Specified Value  
CB, CBC, CBL, CBMF Series  
LBM Series  
No significant abnormality in appearance  
Test Methods and Solvent temperature  
: Room temperature  
Remarks  
Type of solvent  
: Isopropyl alcohol  
Cleaning conditions  
: 90s. Immersion and cleaning.  
17.Thermal shock  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Inductance change : Within±10％  
No significant abnormality in appearance.  
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：－40～＋85℃, maintain times 30min. ,100 cycle  
Remarks Recovery : At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_reli_e-01  
18.Damp heat life test  
Specified Value  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Inductance change : Within±10％  
No significant abnormality in appearance.  
Test Methods and Temperature  
: 60±2℃  
Remarks  
Humidity  
Duration  
Recovery  
: 90～95％RH  
: 1000 hrs  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
19.Loading under damp heat life test  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Test Methods and Temperature  
Inductance change : Within±10％  
No significant abnormality in appearance.  
Specified Value  
: 60±2℃  
Remarks  
Humidity  
: 90～95％RH  
: 1000 hrs  
Duration  
Applied current  
Recovery  
: Rated current  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
20.High temperature life test  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Test Methods and Temperature  
Inductance change : Within±10％  
Specified Value  
No significant abnormality in appearance.  
: 85±2℃  
: 1000 hrs  
Remarks  
Duration  
Recovery  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
21.Loading at high temperature life test  
Inductance change : Within±10％  
LB, LBC, LBR, LBMF Series  
（LBC3225 Series : Within±20％）  
No significant abnormality in appearance.  
Specified Value  
CB, CBC, CBL, CBMF Series  
－
LBM Series  
Test Methods and Temperature  
: 85±2℃  
Remarks  
Duration  
: 1000 hrs  
Applied current  
Recovery  
: Rated current  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
22.Low temperature life test  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
LBM Series  
Test Methods and Temperature  
Inductance change : Within±10％  
Specified Value  
No significant abnormality in appearance.  
: －40±2℃  
: 1000 hrs  
Remarks  
Duration  
Recovery  
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.  
23.Standard condition  
LB, LBC, LBR, LBMF Series  
CB, CBC, CBL, CBMF Series  
Standard test conditions  
Unless specified, Ambient temperature is 20±15℃ and the Relative  
humidity is 65±20％. If there is any doubt about the test results, further  
measurement shall be had within the following limits:  
Ambient Temperature: 20±2℃  
Specified Value  
LBM Series  
Relative humidity: 65±5％  
Inductance value is based on our standard measurement systems.  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_reli_e-01  
WIRE-WOUND CHIP INDUCTORS (LB SERIES)，  
WIRE-WOUND CHIP POWER INDUCTORS (CB SERIES)，  
WIRE-WOUND CHIP INDUCTORS FOR SIGNAL LINES (LB SERIES M TYPE)  
■PRECAUTIONS  
1．Circuit Design  
◆Operating environment  
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,  
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical  
Precautions  
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear  
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or  
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.  
2．PCB Design  
◆Land pattern design  
Precautions  
1. Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications.  
PRECAUTIONS  
【Recommended Land Patterns】  
Technical  
Surface Mounting  
considerations  
・ Mounting and soldering conditions should be checked beforehand.  
・ Applicable soldering process to those products is reflow soldering only.  
3．Considerations for automatic placement  
◆Adjustment of mounting machine  
Precautions  
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.  
2. Mounting and soldering conditions should be checked beforehand.  
Technical  
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.  
considerations  
4．Soldering  
Precautions  
◆Reflow soldering（ LB and CB Types）  
1. For reflow soldering with either leaded or lead-free solder, the profile specified in "point for controlling" is recommended.  
◆Recommended conditions for using a soldering iron  
1. Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350℃ Duration-3 seconds or less. The soldering iron  
should not come in contact with inductor directly.  
◆Reflow soldering（ LB and CB Types）  
1. Reflow profile  
Technical  
considerations  
◆Recommended conditions for using a soldering iron  
1. Components can be damaged by excessive heat where soldering conditions exceed the specified range.  
5．Cleaning  
Precautions  
◆Cleaning conditions  
Washing by supersonic waves shall be avoided.  
Technical  
◆Cleaning conditions  
considerations  
If washed by supersonic waves, the products might be broken.  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_prec_e-01  
6．Handling  
Precautions  
◆Handling  
1. Keep the inductors away from all magnets and magnetic objects.  
◆Breakaway PC boards（ splitting along perforations）  
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the  
board.  
2. Board separation should not be done manually, but by using the appropriate devices.  
◆Mechanical considerations  
1. Please do not give the inductors any excessive mechanical shocks.  
◆Handling  
1. There is a case that a characteristic varies with magnetic influence.  
◆Breakaway PC boards（ splitting along perforations）  
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.  
◆Mechanical considerations  
Technical  
considerations  
1. There is a case to be damaged by a mechanical shock.  
7．Storage conditions  
◆Storage  
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the  
storage area should be controlled.  
・ Recommended conditions  
Precautions  
Ambient temperature：0～40℃ / Humidity：Below 70% RH  
The ambient temperature must be kept below 30℃ even under ideal storage conditions, solderability of products electrodes may  
decrease as time passes. For this reason,  
LB type：Should be used within 6 months from the time of delivery.  
◆Storage  
Technical  
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes  
and deterioration of taping/packaging materials may take place.  
considerations  
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .  
i_wound_CB_LB_prec_e-01  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明